Read the instructions thoroughly before testing and bring the cassette and specimen
to room temperature.
1. Bring the specimen and test components to room temperature if refrigerated or
frozen. Once thawed, mix the specimen well prior to performing the assay.
2. When ready to test, open the pouch at the notch and remove the device. Place the
test device on a clean, flat surface.
3. Fill the plastic dropper with the specimen. Holding the dropper vertically,
dispense 1 drop of serum/plasma (about 30-45 µL) or 1 drop of whole blood (about
40-50 µL) into the sample well, making sure there are no air bubbles.
4. Immediately add 1 drop (about 35-50 µL) of sample diluent with the bottle
positioned vertically.
5. Wait for colored line(s) to appear. Interpret the test results in 15 minutes. Do not
read results after 20 minutes.
For Rash Exudate/Nasal swab:
1. Remove test Cassette from the sealed pouch just prior to the testing and lay flflat
on workbench.
2. Insert a nozzle with fifilter into the sample extraction tube tightly.
3. Reverse the sample extraction tube, and add 3 drops sample by squeezing the
extracted solution tube into the sample window.
4. Wait for colored line(s) to appear. Interpret the test results in 15 minutes. Do not
read results after 20 minutes.
